Nuno Bettencourt, born in Portugal and raised in Boston, Massachusetts, grew up in a very musical family. In his teenage years he began playing drums, bass and keyboards, but ultimately settled on guitar as his primary...

The Hamer Archtop Tremolo is based on the Hamer Studio body, the third classic Hamer design introduced in 1977. Upgraded with a solid maple top on a mahogany body, the tone is beefy yet focused and the Dark Cherry Burst...

Hagstrom H-III The H-II and H-III were introduced in 1965, so 2015 marks the 50th anniversary of these iconic guitars. Known for their quirky switches and easy playability, they quickly achieved wide popularity...

Made in Carlsbad, CA. Basswood Body, Hand shaped neck, Nitro finish, 52mm Wilkinson Bridge, USA Hand Wound Vintage style Pickups w german magnets, Wider, thicker neck like original 60 strats, Mullard Caps, Sheilded...

Bought From Lost Ark Studio in PB. setup niceley, stays in tune, good straight neck, low action, plays nice, pickups are bright and powerful

- Neck: Bolt-on mahogany, satin finish- Fingerboard: Blackwood, 22 frets- Pickups: 1 x double coil, Gold Foil type, and 1 x Humbucker- Controls: 1 x volume + 1 x tone- Pickup selector switch: 3 positions + mini switch to...

- Top: Flamed maple- Neck: Set mahogany, satin finish- Fingerboard: Blackwood, 22 frets- Pickups: 1 x double coil, Gold Foil type, and 1 x Humbucker- Controls: 1 x volume + 1 x tone- Pickup selector switch: 3 positions +...

- Neck: Bolt-on maple, satin finish- Fingerboard: Blackwood, 22 frets- Pickups: 3 x single coil, P90 type- Controls: 1 x volume + 1 x tone- Pickup selector switch: 5 positions + mini switch to select the neck pickup-...

- Neck: Bolt-on maple, satin finish- Fingerboard: Blackwood, 22 frets- Pickups: 1 x double coil Humbucker and 1 x simple TV type pickup - Controls: 1 x volume + 1 x tone- Pickup selector switch: 5 positions, toggle switch-...

- Top: Spruce- Back and sides: Spruce- Neck: Mahogany, with truss rod - Fingerboard: Blackwood, with ABS inlays - Scale length : 600 mm (23.6") - Nut width: 34 mm (1.34") - Bridge: Blackwood- Nut and saddle: ABS- Soundhole:...

- Top: Sapele- Back and sides: Sapele- Neck: Mahogany, with truss rod - Fingerboard: Ovangkol, with ABS inlays - Bridge: Ovangkol- Resonator: Single cone wooden biscuit - Nut and saddle: ABS- Machine heads: Diecast, nickel...

- Top: Spruce- Back and sides: Spruce- Neck: Mahogany, with truss rod - Fingerboard: Blackwood, with ABS inlays - Scale length : 600 mm (23.6") - Nut width: 34 mm (1.34") - Bridge: Blackwood- Nut and saddle: ABS- Soundhole:...

- Top: Sapele- Back and sides: Sapele- Neck: Mahogany, with truss rod - Fingerboard: Ovangkol, with ABS inlays - Bridge: Ovangkol- Nut and saddle: ABS- Soundholes: Two holes with synthetic wood cover- Machine heads: Diecast,...

- Top: Spruce- Back and sides: Spruce- Neck: Mahogany, with truss rod - Fingerboard: Blackwood, with ABS inlays - Scale length : 600 mm (23.6") - Nut width: 34 mm (1.34") - Resonator: Single cone wooden biscuit - Nut and...

- Back and sides: Rosewood- Neck: Mahogany with truss rod- Fingerboard: Rosewood with side dot position markers- Bridge: Rosewood, 12 holes- Nut and saddle: NuBone- Headstock veneer: Rosewood- Rosette: Spanish style- Body...